DIY/ Essential Oils/ Home Decor

DIY Candles: Vanilla and Lavender

Hey Folks,

I hope you are having a great day wherever you are. I wanted to show you how I made these DIY candles with vanilla and lavender scents. They were super easy to make, and I added a few things to the kit that I purchased.

Materials for DIY Candles

For the materials you will need:

Step 1: Melting the Wax

First, I melted the wax by placing the candle-making pitcher in a pot filled with water.

I put all of the wax in the pitcher and waited until it melted. This took about 10 minutes. 

I then placed the thermometer in the wax to see if it had reached 150 degrees Fahrenheit/66 Celcius. This is the temperature where you may add your fragrance. It needs to be below 200 degrees F/93 C but not lower than 150 so that the fragrance can bond. If it’s too cold it won’t bond, and too hot will burn it all away.

Step 2: Add Fragrance and Lavender Leaves

As mentioned you would add the fragrance at about 150 degrees/66 C, I then also added 25 drops of lavender essential oil that I had around the house. I took the pitcher off of the heat source and mixed in the leaves.

From there I simply poured everything in the votives after using the tacky to glue down the wicks with clips and the woodsies dowels to hold the wick in place.

**Wait for the wax to cool a bit (to 120 degrees/48 C) before pouring**

Step 4: Wait Overnight to Dry/ Adding More Leaves

Next step for your DIY candles is to wait for them to dry. I added more leaves while they were drying because it seems some were sticking down at the bottom. I would also give the candles a stir just to get the wax to dry uniformly in the votive.

Step 5: Cut the wix to 1/4 Inch

You are pretty much done at this point! Easy to make DIY candles in 5 easy steps.

 

 

Please like/share/pin!

 

You Might Also Like

No Comments

Leave a Reply